Pulp product overview

Haindl Fractionator

Successor of Brecht Holl Fractionator device

original Einlehner

Code: P.300.xxx

USAGE

To determine the splinter content and fractionate fiber into classes.

DEVICE DESCRIPTION
The Haindl fractionator is made of corrosion-resistant materials. The lower part of the fractionator houses the motor with the eccentric that moves a rubber membrane up and down. The speed of the motor and thus the strokes per minute can be set up to 200 strokes per minute. The pulsating membrane generates pressure and suction movements on the sieve plate attached above. The standard sieve plate has slots with a width of 0.15 mm, through which smaller fiber components are flushed, larger particles or splinters remain on the sieve plate. Water is injected through the sieve via a calibrated ring nozzle. The fractionation time is set by means of a timer.
FEATURES
  • compact table-top device
  • made of premium stainless steel
  • easy pressure control and water flow regulation
  • CE certificate
APPLICABLE STANDARDS
FAK Merkblatt 201; Zellcheming Merkblatt VI/I/66

 

SPECIFICATIONS

double strokes of the membrane 200 strokes/min

CONNECTIONS

Electricity 230 V, 50 Hz AC
Water Connection required
Drainage Connection required

Other voltages on request possible

MODELS

Code Description
P.300.100 device without plate
P.300.108 device with 0.08 mm slot plate
P.300.110 device with 0.10 mm slot plate
P.300.115 device with 0.15 mm slot plate
P.300.120 device with 0.20 mm slot plate
P.300.125 device with 0.25 mm slot plate

ADDITIONAL PLATES

Code Description
P.300.008S 0.08 mm slot plate
P.300.010S 0.10 mm slot plate
P.300.015S 0.15 mm slot plate
P.300.020S 0.20 mm slot plate
P.300.025 0.25 mm slot plate
P.300.DN16 DIN 16 sieve plate
P.300.DN50 DIN 50 sieve plate
PDF EN